Regulators

Vertical Regulator Cover

• Used with 07-30365 Regulator
• Plastic, one piece cover
• Easy, snap-on installation

Part Number: 07-30295

Horizontal Regulator Cover

• Used with 07-30385 Regulator
• Plastic, one piece cover
• Easy, snap-on installation

Part Number: 07-30305

Auto Changeover Regulator Cover

• Used with 07-30395 Regulator
• Plastic, one piece cover
• Easy, snap-on installation

Part Number: 07-30315

High Pressure Regulator

 

KEY FEATURES

• 1/4″ FPT Inlet x 1/4″ FPT Outlet
• 500,000 BTU/Hr or 30 PSIG based on 100 PSIG inlet
• Primary use, dual bottle with distant separation applications
• Ideal use where PSIG rather than W.C. is needed

https://jrproducts.net/wp-content/uploads/2018/05/07-30325.mp4

Part Number: 07-30325

Low Pressure Regulator

• 1/4″ FPT Inlet x 3/8″ FPT Outlet
• Drip lip vent above outlet
• 175,000 BTU/Hr based on 25 PSIG inlet & 9″ W.C.
• Primary use, portable appliances

Part Number: 07-30335

Z Regulator Bracket

• Used for mounting LP gas regulators on flat surfaces
• Normally uses two (2) for installation
• Includes regulator screws

Part Number: 07-30345

Square Regulator Bracket

• Used for mounting regulator on flat surfaces
• Includes regulator screws
• Replaces the use of two (2) Z brackets

Part Number: 07-30355

Low Pressure Two-Stage LP Gas Regulator

• Combines both a high pressure first stage and a low pressure second stage regulator into one unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Above Outlet Vent Position
• 1/4″ FPT Inlet
• 3/8″ FPT Outlet
• 225,000 BTU/Hr Capacity
• Zinc Die Cast
• Molded Rubber Diaphragms
• UL Approved
• 2nd Stage Relief Mechanism Per UL 144
• Adjustable Screw and Dust Cap Design
• Powder Coated

Part Number: 07-30365

Excess Flow POL Regulator

• Combines both a high pressure first stage and a low pressure second stage regulator into one unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• Zinc Die Cast
• Molded Rubber Diaphragm
• UL Approved
• 225,000 BTU/Hr Capacity
• 2nd Stage Relief Mechanism Per UL 144
• Adjustable Screw and Dust Cap Design
• Powder Coated

Part Number: 07-30375

Low Pressure Two-Stage LP Gas Regulator

• Combines both a high pressure first stage and a low pressure second stage regulator into one unit
• Ideally designed for RV applications, these regulators ensure a smooth and continuous flow of gas to all appliances
• 9:00 Vent Position
• 1/4″ FPT Inlet
• 3/8″ FPT Outlet
• 225,000 BTU/Hr Capacity
• Zinc Die Cast
• Molded Rubber Diaphragms
• UL Approved
• 2nd Stage Relief Mechanism Per UL 144
• Adjustable Screw and Dust Cap Design
• Powder Coated

Part Number: 07-30385

Automatic Changeover Regulator

• • Automatically redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder without interruption
  • Green indicator dome changes to red when the service cylinder needs to be filled
  • 1/4” Inverted Flare Inlet Connections
  • 3/8” FPT Outlet Connection
• • 345,000 BTU/Hr Capacity
  • Zinc Die Cast
  • Molded Rubber Diaphragms
  • UL Approved
  • 2nd Stage Relief Mechanism Per UL 144
  • Powder Coated

Part Number: 07-30395

U/Post Regulator Bracket

• Used for mounting LP gas regulators on threaded tank rod
• Includes regulator screws

Part Number: 07-30405

Compact Low Pressure Two-Stage Automatic Changeover Regulator

• • Compact version
  • Automatically redirects LP gas vapor flow from an empty designated service cylinder to a reserve cylinder without interruption
  • Green indicator dome changes to red when the service cylinder needs to be filled
  • 1/4” Inverted Flare Inlet Connections
  • 3/8” FPT Outlet Connection
• • 262,500 BTU/Hr Capacity
  • Zinc Die Cast
  • Molded Rubber Diaphragms
  • UL Approved
  • 2nd Stage Relief Mechanism Per UL 144
  • Powder Coated

Part Number: 07-31525